How Big Is a Wrought Iron Fence Post Hole?
When you’re installing a wrought iron fence, one of the first questions that arise is how big the fence post hole will be. This will determine how stable and secure your fence is and if it can be blown over. In addition, it will affect the final height of your fence and the amount of money you’ll have to spend on fencing materials.
(Looking for”wood fence repair nearby“? Contact us Today!)
Wrought iron fences are available in a wide variety of styles and colors. They’re also highly customizable, meaning you can mix and match different metals to create a unique look that’s right for your home.
If you’re looking for a less expensive fence, consider choosing cast iron. It’s made using a mold, which makes it easier for manufacturers to produce en masse without the labor-intensive work that comes with working with wrought iron by hand. It’s less expensive than wrought iron, but you won’t be able to customize it with as many decorative details as you can with wrought iron.
Another option is to build your own fence with hollow-steel pickets and rails. The advantage of this method is that it can create 8-foot-long panels, but the disadvantages include the need for a lot of posts and the fact that it’s not as sturdy or attractive as other types of fences.
Installing a fence isn’t as simple as it might seem, however. You’ll need to dig numerous holes and then mix a quick-set concrete mixture for each one. This process can be time-consuming and frustrating if you’re not familiar with it.
Once your fence post holes are dug, you can then set the posts in the ground. To help keep them from moving or settling too much, you may need to add an additional layer of soil or gravel around the fence posts. Then, you’ll have to tamp each layer down firmly. This process can take a few hours, and if you’re working alone, it will be more difficult than if you had at least two people helping.
It’s a good idea to call your local utility company and get underground utility lines marked before digging your post holes. This will help you avoid interrupting services and putting yourself in harm’s way.
You should also spray paint large Xs along the line at intervals of 8 feet to indicate where your posts will go. You can then use a post hole digger to dig the post holes, then mix in gravel to fill them up to about 2 feet deep.
The next step is to attach the wrought iron fence panel sections to the posts. This is a relatively easy task, and the kits come with all of the screws you’ll need to do the job. It’s a good idea to have someone else hold each fence panel in place until the glue sets.
After the fence panels are secured to the posts, you can begin assembling them into the finished fence. You’ll need a ladder to reach the tops of the posts and a couple of people to help you do this, but it should be fairly straightforward.
