How Do You Install a Wrought Iron Fence?
When you install a wrought iron fence, you are able to enhance the look of your property while increasing your home’s value. However, this type of fence requires a lot of time and effort. You’ll need to use various tools and materials to complete the job. A professional installer is recommended for this project.
(Searching in Google “fence professionals“? Contact us today!)
The first step is to measure the area where you want to install your fence. This will help you plan ahead and save time later on. Additionally, it will be useful to mark underground utility lines. For example, if you’ll be installing a fence near a water source, you’ll need to know where it will be. Another important aspect of the fence installation process is the marking of the perimeter with paint.
Next, you need to determine the size of the hole for each post. The holes should be at least 2 feet deep and have a diameter of at least 6 inches. Ideally, the posts should be placed in the holes and the top 4 inches of the hole should be filled loosely with earth. Once the hole is filled, let the concrete set for at least a week.
After the concrete has set, you’ll need to line up the brackets on each of your panels with the posts. It’s important to do this right. If you don’t, you’ll risk a miscalculation or even a mistake.
To connect your panels, you’ll need a drill bit and fasteners. It’s also a good idea to spray your fence with a primer, which will keep it looking new for years.
If you’re not sure how to install a wrought iron fence, you might consider hiring a contractor. They’ll be able to make the process simpler. There are also kits available that include everything you’ll need, so you’ll never have to go back to the store for parts.
Before you begin your fence installation, you’ll need to get the appropriate permits. These may be required by your local government, and the building codes will likely govern the type of fencing you use. In addition, you’ll need to get permission from your homeowner’s association, which will have to approve your plans.
Once you’ve gotten all the permits and the necessary permissions, you’ll need to set the posts. You can use wooden posts, but they may need repair in the future. Alternatively, you can use concrete posts for extra stability.
The vertical components of a wrought iron fence are usually spaced about 6-7 inches apart. These are often called “spires.” Many of these designs are decorative, and come in spirals or floral patterns.
If you’re installing a fence that includes gates, you’ll need to make sure that your gate is secured in place. These are heavy and can be difficult to maneuver if you’re not familiar with the equipment needed. Also, you’ll need to hang the gates using the included hardware.
Wrought iron is a soft material, but can rust when it’s exposed to oxygen. Make sure you clean your railings and other areas of your fence with soap and water, and that you apply a rust converter. Otherwise, your fence will rot and rust.
