Call Us Today! (406) 478-5125

How Far Apart Are Chain Link Fence Posts? 

Fences come in two types of posts, corner posts and line posts. Corner posts add rigidity to chain link fabric, while line posts add support. In general, fences are set up at eight-foot intervals. However, the spacing can vary based on the type of soil, the size of the fence, and the wind speed. The size and weight of the materials will also play a role in determining the appropriate number of posts. 

(Searching in Google “Fence Expert“? Contact us today!)

To install a chain link fence, first determine the perimeter of your property. This will allow you to calculate the number of posts and chain link material you will need. Next, use the 3-4-5 method to square your corners. If you have a concrete footer, you can use a post hole digger to mark the ground for your posts. 

Once you have marked your posts and drilled holes, the next step is to install the tension bars and rail caps. A tension bar is a vertical bar woven into the fabric that makes the end of the fence rigid. It is inserted into the brace bands on terminal posts. After installing the bars, tighten them with a socket wrench. Tightening the brace band to the correct height ensures that the top rail and mesh are level. 

Chain link fences require posts that are either concrete or wood. You can purchase pre-made concrete, or you can mix your own. For every 10 feet of fence, you should have at least one concrete post. Each post should be at least six inches in diameter, with the corner posts requiring at least an inch and a half. 

Use a tape measure to calculate the amount of fence material you will need. If your fence is to be installed on a slope, you will need to dig a trench around the posts to create a downward slope. Before digging, make sure that the ground is smooth. Dig down about 2 inches and then fill it with concrete. When you are done, it should be level and plumb. 

Once you have poured your concrete, you should fill each post with about four inches of gravel. This is to provide a solid foundation for the fence. Be sure that the bottom of the straining post is concreted. Otherwise, it will be susceptible to sagging. 

If you are working with a chain link fence, be aware that you may need to raise the top of the rails to smooth it out. If the rails are not smooth, you will need to use a file or hacksaw to trim them. Also, you will need to leave about two inches of space below the fence to avoid any problems with the bottom of the fence. 

If you are working with a large fence, you will likely need to adjust the fence’s parameters to keep it from encroaching on adjoining properties. This is usually a good idea, especially when you are building a very tall fence. 

To install a chain link fence, you will need to have concrete posts buried every three meters, with posts every 10 feet. You will also need a number of tension bars, rail caps, and other fence parts. Make sure to follow the manufacturer’s instructions for installing the fence. Wear protective equipment, such as heavy gloves, eye and ear protection, and safety glasses.