Call Us Today! (406) 478-5125

How to Attach Wire Fence to Wood Post?

Building a wire fence is not too difficult, as long as you know the basics. First, you need to determine where you want to place your fence. A good way to do this is by using a mason’s line. You can then use stakes to mark the perimeter of the area. 

(For more metal fencing ideas, contact us today!)

Next, you’ll need to determine how deep the holes need to be. If you live in a cold climate, you should dig the posts below the frost line. This will prevent the heaving that can occur when digging. In order to do this, you need to be careful to not damage your concrete. It’s also important to remember that your fence posts will need to be set a minimum of 3-1/2 feet in the ground. The depth should be equal to the depth of setting. 

Once the holes are dug, you can insert the posts. When doing this, make sure the studs in the posts are in the same direction as the fence. These studs are designed to help secure the wire fence to the post. 

After securing the posts, you should then attach the mesh to the rails. There are a number of different ways to do this, but the most popular and easiest is by using a staple gun. Be sure to get heavy duty staples that will hold up to the elements. 

Another alternative is by hammering staples into the posts. However, this method is not as efficient as using a staple gun. Also, hammering a staple into a post can create unwanted side effects, such as ripping the mesh out of the wood. 

You can also tie the mesh to the post with cable ties, masonry screws, or self-tapping screws. Make sure to keep the wire taut to avoid twisting the mesh. Lastly, you may want to use a stretcher bar to help you pull the wire tightly. 

When you have the fence posts in place, you’ll want to attach the top and bottom rails. Make sure to use a level to ensure that they’re in the right places. Ideally, the top rail should be in the center of the board. At the same time, you should have the bottom rail at least 6 inches up from the ground. 

The best part about this process is that you’ll have a sturdy and attractive fence that you can use for years to come. Just be sure to take the time to plan your project carefully. As you can see, the process of building a welded wire fence isn’t that hard to do, as long as you plan ahead and do your research. 

The most important thing to do when constructing a welded wire fence is to be sure that you’re using quality fasteners. In addition, you should make sure to put some thought into your design, especially your corners. To make your welded wire fencing look its best, you should lay it out flat from post to post.