Call Us Today! (406) 478-5125

How to Build Chain Link Fences?

If you are thinking about adding a chain link fence to your yard, you will need to take some basic steps to ensure that you get the job done right. In addition to the hardware and stakes that are required to install the fence, you will also need to mark the corners of the fence to make sure that everything is in the right place. You can use tape or even spray paint to help you with this task. 

(Looking for Missoula fencing? Contact us today!)

There are two main types of poles used to build a chain link fence. The first is a terminal post, which is installed in the corner of the fence. The second type is a line post, which is installed between the terminal posts. The difference between the two is that a terminal post is usually made from steel, while a line post is made from aluminum. This is because terminal posts are heavier and sturdier than a line post. 

You will need to make a few measurements in order to determine how tall your chain link fence should be. The height of the fence is based on the type of chain link material you decide to use. If you want a chain link fence with a taller profile, you will need to install more tension bands. You can get a better idea of how many bands you will need by substracting the height of your fence from the length of the band. You can use a yard-flag to mark the corners of your fence. 

You will also need to dig holes for your fence posts. For a chain link fence, you will need to dig a hole at least four inches deep and six inches wide. You will need to have a post-hole digger on hand, as well as an auger. The holes need to be deep enough to hold the fence posts in place while you work. The ground should be a bit softer than the posts so that they don’t sink in too far. You should leave the hole to set for at least 24 hours. 

There are several components that make up a chain link fence, and each component plays a different role. For instance, the brace band is designed to attach the top rail to the fence. The tie wires are also necessary. The tie wires are designed to slide around the rail and secure the chain link mesh. 

If you are installing a chain link fence on your property, you should wear a good pair of heavy gloves and a helmet. You should also make sure that you wear the right safety glasses. Using the right tools and equipment is the best way to avoid injury. If you plan to install a chain link fence yourself, it is best to have a little help from a friend. 

There are many advantages to installing a chain link fence. For one, it helps reduce your visibility and provides privacy. You can also add greenery to your property, which will increase the value of your home.