Call Us Today! (406) 478-5125

How to Cut Chain Link Fence With Bolt Cutter?

Using bolt cutters to cut chain link fences is not a difficult task. The key is to find the right tool for the job. Bolt cutters are a great choice because they are inexpensive and easy to use. Bolt cutters also make cutting through fence tension bars easy. You can use a bolt cutter for other things, too, such as cutting a gate post. Bolt cutters are easy to find, and a small model will suit most DIY enthusiasts’ needs. They can be purchased for under $50 USD. 

(Searching in Google “cedar privacy fence repair“? Contact us today!)

Chain link fences have a woven construction, which means the fence sections are not cut to a specific length. If you have an existing fence that is not a perfect fit for your property, you can cut the chain link and reuse the parts. This method is more difficult than cutting a fence post. If you plan to reuse the parts of your fence, you should install a fence stretcher in advance of making any cuts. Installing a fence stretcher will help you hold the tension in the fence. This will make installing the fence easier and faster. 

Aside from bolt cutters, there are a few other tools you can use to cut chain link fences. These include manual saws, power saws, and pliers. Using a power saw can be more expensive than using manual saws, but it will make the job much easier. 

For a small section of chain link fence, you can use a regular pair of pliers to cut the chain link. If you have a large section of chain links, you may want to get a pair of lineman’s pliers. You can also use a come-along cable puller winch to pull the chain link fabric out of the fence. 

The best way to cut a fence is to cut a length of fence in sections. If you want to make a clean cut, you will need to measure the length of your fence and cut off the excess chain link. You can also cut your fence posts to the same length before installing the fence. This will make removing them much easier later on. 

Aside from the fence stretcher, you will need to install a tension bar before making any cuts. This will hold the tension in your fence, so it’s important to use it. The bar is a small piece of metal that slides between the tension bands on the end posts of your fence. Once the tension bar is installed, you can cut your fence by pulling the end piece of the fence out. Once you have done this, you can make the actual cuts. 

To cut a chain link fence, you need a pair of pliers and a small bolt cutter. The mini bolt cutter is great for cutting small offcuts of chain links. It can also be used to cut a marked strand of wire. Using a mini bolt cutter will save you a lot of time and trouble.