Call Us Today! (406) 478-5125

Vinyl Fence Panels 

Trying to cut vinyl fence panels can be a daunting task, but fortunately, there are many different tools available to help you get the job done. These tools include a circular saw, a jigsaw, and a hand saw. Whether you choose to use one of these tools or a combination of them, you need to make sure that you are following a few basic guidelines in order to achieve the smoothest cut possible. 

(Looking for Montana Fence Company? Contact us today!)

First, make sure that you have a good idea of what material you will be cutting. If you don’t, you could end up with a lattice that is useless. However, if you know exactly what you are cutting, you can avoid the most common pitfalls. Aside from using a proper blade, you should also consider other important factors. These may include the type of materials, how long the panel will need to be, and what you will be doing with it. Lastly, make sure that you have all of the proper safety gear. 

To properly cut your vinyl fence panels, you will need to have a sharp blade and a level work surface. You can purchase a specific blade for this purpose. The blade should be at least 2 inches wide, and it should be able to be pushed into the panel without straining it. 

When it comes to choosing a saw, you want to make sure that you pick a good quality saw that has a special anti-stick coating. This helps reduce friction while you are cutting. It also makes the process quicker. You should make sure that you read the instructions for your saw and that you are wearing the appropriate protective gear. 

Another good choice is a coping saw. This type of saw will help you to cut through the vinyl more easily. If you don’t have a coping saw, you can use a hacksaw or sawzall to achieve the same result. You should not rely on a normal saw to cut the vinyl, as this can splinter the material. 

You should also look into installing a bottom rail. This will help to raise the pickets higher and will make them stronger. You should also wrap the sections that you have buried in the ground with duct tape, as this will help to prevent the piece from cracking. 

You should also take the time to mark and measure your fence post. This will ensure that you have the right size panel to fit between the posts. This is especially important if you are installing a long, intricate fence. You should also make sure that you have a fence post hole saw to create the necessary hole. 

It’s not always easy to line up your fence posts, but it is definitely worth the effort. If you have a string tied to your stakes, you can easily make sure that the line is straight. It can also be useful as a guide for the middle posts.