Call Us Today! (406) 478-5125

How to Electrify a Chain Link Fence?

When it comes to electrifying a chain link fence, there are many options. There are electric fence chargers, wires, and insulators. Choosing the right type of wire can make a difference. Polywire is a good option for electrifying a pet fence. This type of wire is less expensive than other electrical options and is easy to repair in the event of a break. 

(Searching in Google “Chain Link Fencing Service“? Contact us today!)

An insulated cable is a must when electrifying a chain link fence. The insulated wire should be wrapped around a different wire to provide a barrier to the electricity. In addition, the wire must be able to run through the insulators to create a complete circuit. It is also necessary to install a ground rod. 

Electrifying a chain link fence isn’t as difficult as you might think. You just need to use a few tools to get the job done. First, you’ll need to measure the area you’re going to electrify. After you’ve measured the area, you’ll need to purchase the required materials. Wire is available at any home improvement store. 

Choosing the right energizer is also a must. Depending on your needs, you can either choose a mains powered energizer or a wet battery energizer. For a permanent fence, it’s best to go with a wet battery energizer, but a mains powered energizer works well if you need to move the fence regularly. 

An energizer produces small pulses of electricity that are emitted about once every second. They’re also able to produce an electric field around the fence. These pulses are meant to stop animals from crossing the line. 

To create an electric fence, you will need to install an energizer, insulated cable, and a ground rod. While it’s possible to electrify a fence on your own, if you don’t know what you’re doing, it’s best to hire a professional. If you’re electrifying an existing fence, you can install permanent hot wires. A hot/ground return system is also an option. 

Choosing the right energizer depends on whether you plan to electrify an outdoor or indoor fence. The most common options are dry battery-powered energizers and wet battery energizers. Although the battery-powered energizer is the simplest, it doesn’t give you as much power as a mains-powered one. Electrifying a chain link fence using a mains-powered energizer is more effective. 

To test the fence, you’ll need to touch it at a certain point. Be careful not to touch the other parts of the fence. Even though the voltmeter on your handheld device may be a good indicator of the electricity flow, it won’t tell you the exact voltage. By testing the fence, you’ll find out if it’s the right power source for your needs. 

Finally, you’ll need to put in the wire. It’s best to choose a 12 or 14 gauge aluminum or copper wire. It is easy to manage and is the best type for conducting electricity. Using the most insulated wire is the best way to ensure that the electricity isn’t going to get caught on anything. Also, it’s important to keep weeds and other objects away from the fence.