Call Us Today! (406) 478-5125

How to Install a Vinyl Privacy Fence?

Whether you are building a new fence or replacing an old one, you will need to do some research before you begin. You’ll want to check local building and zoning regulations to ensure that you won’t violate any laws, and also check your deed and any easements. You’ll also want to check the local city hall website to see if you can get a building permit. 

(Searching in Google “chain link fence parts? Contact us today!)

To install a vinyl privacy fence, you’ll first need to lay out the job. This involves measuring the perimeter of your property to see if you can fit a straight fence in. You’ll also want to decide how high you want the fence to be. For example, if you have a steep hill in your backyard, installing a vinyl fence can be a daunting task. Fortunately, a number of companies are able to offer advice on what type of vinyl fence is best for your property. 

If you want a privacy fence, you’ll need to use posts that are at least six feet tall. These should be spaced every six feet. Depending on where you live, you may also want to consider adding a bottom rail to give the fence some extra strength. 

Before you start, make sure you have the proper equipment on hand. The best tools to use for this job are a post-hole digger and gloves. You should also have a pressure washer available to remove dirt and algae. A level bubble tool will also come in handy for smoothing out exposed concrete. 

In addition to the fence, you’ll need to install rail brackets on each post. These will need to match the rails on the panels you’re installing. Also, the brackets will need to be fastened to the fence post with the appropriate screws. 

Next, you’ll need to prepare the ground. The ground will need to be smoothed out and sanded so the panels will slide more easily. Additionally, you may need to remove any obstacles in the way. You may also want to add gravel to the ground to help rainwater drain away from the footing of the fence post. This will also reinforce the fence posts. 

The fence may be the most important part of the installation, but you can’t install a fence without the posts. Using a post-hole digger will make the job easier. You should also check your deed to see if you can use underground utilities. In addition, you’ll want to notify any neighbors of your plans. If you have a lot of houses on your property, you may need to get a permit. Lastly, you may want to call 811 to ensure that you’re not in violation of any zoning laws. 

The best way to install a vinyl privacy fence is to plan it out ahead of time. Once you’ve done so, you’ll need to calculate how many fence panels you’ll need. Then, you’ll need to figure out where the posts are going to be placed. You may also want to consider installing a gate. This will provide additional privacy in your yard.