Call Us Today! (406) 478-5125

Install Pre-Assembled Vinyl Fence Panels 

Putting together vinyl fence panels isn’t as difficult as you might think. In fact, it is a lot easier than setting posts. It’s not even necessary to have a lot of special tools. In fact, you’ll probably only need a staple gun, a few screws, and some leveling cement. 

(Looking for Montana Fence Services? Contact us today!)

The key to successfully installing a vinyl fence is to have your posts properly aligned. This can be done by using ground stakes, spray paint, or a mason’s line to draw a straight line from one post to another. 

For a smooth finish, you can use a level bubble tool. It’s a cheap (around $5) tool that makes it easy to get your posts in the right place. Once your posts are in place, you can remove the concrete with a trowel. Then you can insert the top rails of your fence into their respective notches. 

As you install each panel, make sure to check each one for the correct level. This is particularly important if you are installing a privacy panel. In order to achieve proper privacy, the panels should be positioned on the back side of the fence and have a screw at the bottom rail. 

The bottom line is that pre assembled vinyl fence panels are a great choice for homeowners who don’t have the time or money to build their own fence. They are also very durable and low maintenance. If you’re in the market for a new fence, you’ll be happy to know that there are a number of companies out there that will help you put it together for a reasonable price. They may even deliver it for free if you buy a certain amount. 

When assembling a preassembled vinyl fence, it’s best to use a circular saw with a fine-tooth blade. These are a good option for cutting odd-sized panels. They have an edge cover to hide any imperfections. You might also want to purchase a few extra pickets. This will cost you a bit of cash, but it will save you a lot of hassle in the long run. 

The biggest challenge of putting together a preassembled vinyl fence is actually lining up the posts. If you don’t properly align your posts, you may have problems with your fence buckling, warping, or drooping. It can be tough to get your posts to line up, but it’s well worth the effort. 

The simplest way to do it is to measure the length of the fence you need. If you have an existing fence, you can use a string line to mark the distance between each post. If you don’t, you can measure from one post to the property line, or from one post to another. However, you should also consider the size of your yard and the dimensions of your fence. When you do this, you’ll be able to determine which pieces of your fence need to be cut. You can do this on your own, or you can ask a contractor to do it for you.