Install Vinyl Fence Gate
Whether you’re installing a vinyl fence gate for privacy or to keep critters out, there are a few things you should know before you get started. For starters, you will need to find the right materials and check for underground utilities. You may also need a building permit.
(Searching in Google “chain link fence installation“? Contact us today!)
You’ll need to dig holes for your posts. They should be about 30 inches deep. If your site has rocky or hard clay soil, you may need to dig deeper. This will allow for a more consistent height for the post.
You will also need to measure the distance from one of the fence posts to the other. It is a good idea to consult with your county or city to ensure there are no special permits required for your installation. You can also use a handheld post hole digger. If you are installing a larger project, you may want to enlist the services of a notching tool.
A fence with a gate requires an extra special touch, so make sure that your tamper proof hinges are in place. This includes the catch and latch. You can also install a second diagonal brace for added rigidity. This is also a good time to add a bit of crushed gravel around the base of the post to keep weeds at bay.
Using the gate as a guide, mark out the perimeter of your yard. This will help you to calculate the number of pickets and panels you’ll need. You’ll also need to decide whether to use 2 by 4s or standard lumber. Adding a bottom rail is a cheaper and more effective way to raise the pickets off the ground. If you decide to go with lumber, it’s a good idea to cut the rails to the proper length to speed up the process.
There are two basic types of vinyl fences: board and rail and panelized. The first will be easiest to assemble, but the latter will require more effort. There are many styles of vinyl gates to choose from. You can either buy prefabricated kits or have yours made to your specifications.
The best part about building a vinyl fence is that you can easily make changes or upgrades. In fact, the manufacturers of these gate systems will upgrade your product for you every couple of years, making it a worthwhile investment. For example, if your gate starts to sag, you can easily fix it with a heavy gauge vinyl gate brace.
You may also want to consider putting down a few ounces of sand on the bottom of your posts to prevent water from seeping into the concrete. The sand will also keep the cement from heating up. This is important because if the cement is hot, your gate may shift and even fall off its brackets. You can also use clear silicone to seal the holes. You will also need to install a few fence panels to keep your new fence looking its best.