Call Us Today! (406) 478-5125

How to Install White Vinyl Fence?

Whether you are installing a new vinyl fence or replacing your old one, there are some things to keep in mind before you begin. Using the right tools and materials can help you finish the job faster and with less stress. 

(Searching in Google “metal fencing prices“? Contact us today!)

Fencing in Missouri

Before you start digging holes, be sure to check your local building codes. Performing work that does not meet the regulations will cost you more. Also, use premium materials to ensure a quality product. 

Before you begin, you should lay out your plan. This includes deciding on how many panels you will need, measuring them, and determining the proper spacing between them. Then, you can calculate how much material you need. This will save you time and money, and help you get a fence you will be happy with. 

Next, you should decide on a style of fence. There are two main types of vinyl fences, board-and-rail and panelized. The latter is a lot easier to install, and can be used on steep slopes. However, it does not hold up well in hot weather and can fade. 

For a basic fence, you will need concrete footers. For a more secure installation, you should consider installing metal rails at the bottom of the posts. The rails should be beefed up and secured with clips. 

When installing a vinyl fence, it is important to line the posts up correctly. You can do this by staking out the fence line with landscape stakes, or by spray painting the lines with a paint marker. If you are installing a corner post, it is even more important to have the line straight. 

Once you have the layout in place, you can set the post in place. Be sure to use a level to ensure the post is plumb front to back. You should also check each panel to make sure it is level. Once you have the posts set, you can start installing the rails and caps. 

For a more professional-looking fence, you may want to consider installing a custom steel gate. This can be done to match the rest of your fence and give it a finished look. If you do not have the funds for a custom gate, you may be able to find a vinyl fence with a pre-finished steel gate. This will eliminate the need for sagging gates. 

It is also a good idea to install end posts. These feature rail holes on both sides of the post, which makes the installation process much easier. If you are installing a panelized fence, you will need to purchase extra long pickets to make the job more cost-effective. 

It is also a good idea for you to buy a power augur, which can finish a day’s worth of work in just a few hours. This is the only way to be sure that you are making the best use of your time. 

Finally, you will need to add quick-set concrete around the posts. This should be mixed in a wheelbarrow and should cure for at least two days before you start using it.