Call Us Today! (406) 478-5125

How to Make Chain Link Fence Taller?

If you want to add height to your chain link fence, you can do so easily. You can install mesh cloth, a T-post, or some other material. You may also wish to consider adding a few plants to the mix. 

(Looking for Missoula fence companies? Contact us today!)

Fencing in Missouri

For instance, a fast growing evergreen tree can act as a windbreak. Or, a climbing plant or vine can be trained to grow up the structure. If you are interested in a taller fence, you can extend the top of your existing fence using PVC pipes or wood beams. You can also attach a roller to the structure to keep pets from catching on. 

To start, you need to make sure that your posts are plumb. A good rule of thumb is to set them about two inches higher than the fabric of the chain link. This should give you a nice height without the need to replace the old ones. 

For the most part, you can only extend your existing posts a few feet. For instance, a six foot post will allow you to add a few feet to the length of your existing chain link. You will need to plan for the number of posts you need before you begin. You can even leave some of the loose chain link to use when you are not in the mood to install a new section of fencing. 

To make your chain link fence taller, you can raise the posts a few feet and then attach some sort of material to it. You will need a few tools to do this job. You can use a post hole digger to drill a series of holes. Once you have these, you can add some concrete to fill in the gaps. 

The best part about this process is that you will not have to remove any of the old, weaker chain link. However, you will need to cut it up. You can do this by unscrewing the wire ties. Then, you can pull the wire ties tight to the other end of the fence. This can be done with a pair of pliers. 

Another way to add height to your chain link fence is to add fabric to the existing construction. You can buy pre-cut fabric or mesh cloth at a home improvement or hardware store. You can then attach it to your fence with a simple balling wire or T-post. 

The best part is that you can choose from a variety of colors. The material is very durable and weather resistant. You can use it in conjunction with the existing chain link to make your chain link look better than ever. The most important part is to have the proper tools on hand. You should have a pair of pliers, a pair of hammers, a hammer, a tape measure, a pair of scissors, and a small tool kit. Having the correct tools will ensure that your project goes off without a hitch.