Call Us Today! (406) 478-5125

How to Paint a Rusty Wrought Iron Fence? 

If you have a rusty wrought iron fence, it can make your home look unattractive and can be an eyesore for neighbors. In order to keep your fence looking its best, you should paint it regularly so that rust does not build up. This can be done by yourself or you can hire a professional painting service to help. 

(Looking for a “wood slat fence contractor“? Contact us Today!)

Before you can paint a rusty wrought iron fence, you must remove any rust and old paint. This is important so that the new coat will adhere properly and give your fence a smooth finish. 

Removing rust can be done by hand using a wire brush or with a sandblaster. In some cases, a chemical rust neutralizer can be used to nip rust in the bud before it takes hold and becomes more serious. 

The sanding process will also allow you to get rid of any loose or flaking paint. Be sure to use 150-grit sandpaper to prepare the surface for repainting. 

After you have completed sanding, you should apply a layer of rust-inhibiting primer to the fence. This is an essential step before you can begin painting, as it helps prevent rust from forming in the first place. 

Rust-inhibiting primer will need a full 24 hours to dry before you can apply paint. During this time, make sure that you cover all areas of the fence with drop cloths and that you wear gloves to protect your skin from any paint shards that may fall on it. 

Once the rust-inhibiting primer has dried, you can apply two coats of oil-based spray enamel. This type of paint is designed specifically for metal surfaces and is intended to seal the fence from moisture and corrosion. 

You should sand between each coat of paint to make the finished product look smoother and more durable. It is also helpful to sand any areas where you have applied paint over an existing coat to make the area more even and flat. 

The final coat of paint should be applied with a brush or roller. If you use a roller, choose one that has narrow bristles that will be able to reach the details of your fence. You should also use a brush that has stiff bristles to ensure you get even coverage. 

A brush with a tight bristle will ensure that the paint will get into hard-to-reach places and is effective for getting around intricate details on the fence. It is important to apply the paint in thin coats, as too much coating can cause it to peel off over time. 

You should always follow the manufacturer’s instructions when performing any home improvement projects to ensure you achieve the desired result. Especially when it comes to painting a rusty wrought iron fence, taking your time and being meticulous will pay off in the end.