How to Put Up a Vinyl Fence?
Whether you are installing a vinyl fence for the first time, or are simply re-doing your fence, you want to make sure that your fence is installed correctly. Incorrectly installing a vinyl fence can result in a fence that is not level, sags, warps, or buckles. It may even pop out of the ground. To avoid these problems, there are a few dos and don’ts that you can follow to ensure that your fence is installed properly.
(Searching in Google “chain link fencing repair “? Contact us today!)
The first step in putting up a vinyl fence is to determine the boundary lines of your property. The best way to do this is to check your deed and your property line with the help of a surveyor. Depending on your location, you may also need to contact your utility companies to make sure that they are not in the way of your fence installation.
Next, measure the distance between the two posts in the corners of your fence. You can use a string or spray paint to determine the distance between the posts. Make sure that the distance is at least six inches deeper than the posts.
Once you know where the posts will be, set the posts in concrete. This will give your fence more strength and durability. You will also need to fill the holes with six inches of gravel, which will drain away from the posts. You will also need to be sure that the concrete is fast-drying. You should also use a level bubble tool to force the post into the cement. This tool will help to smooth the exposed concrete and ensure that the bubbles are centered before the concrete sets.
After the posts are set, you can begin putting the vinyl fence panels into place. This step is easier than setting posts. Most vinyl panels come with a top rail and a bottom rail. If you have a large project, you may want to use a notching tool to make sure that your fence is installed properly.
After the posts are set, you will need to secure the top rail and bottom rail to the posts. This is a relatively simple step, but it is important to ensure that you have the right screws for the job. You can also use vinyl fence glue to secure the caps to the posts.
You can also make your vinyl fence look more polished by using clips to hold the metal rails in place. You can also use a screw gun to attach the side strips to the rails. This will help to ensure that the pickets are properly installed. The fence should also be capped with a top rail to protect against rain and pests.
Installing a vinyl fence may seem simple at first, but the process can be complex. In addition to setting posts, you will need to check that your fence has all the necessary hardware and accessories. Before you begin, you should check with your local building codes to make sure that you are in compliance. You may also need to change the way you install your fence if you live in an area with extreme weather or wind conditions. If you have any questions, contact your fence manufacturer or a professional fence installer. These people will be able to help you avoid the common pitfalls associated with installing a vinyl fence.
