Call Us Today! (406) 478-5125

How to Removal Fence With a Tractor?

Whether you are installing a new fence or removing an old one, the first step is to mark your fence post holes. This will let you know where to dig and help keep you from digging in areas that are not needed. In addition, it helps reduce the amount of debris that will be left behind when you are removing the fence. 

(Searching for “wood fence cost“? Contact us today!)

If you have a tractor and a front-end loader, you can lift the posts off the ground. If you do not have a tractor or front-end loader, you can also use a grapple to remove fence posts. A grapple is a great tool for pulling trees and small posts. A grapple can also carry the debris to a disposal pile. You can also use a pry bar to loosen the posts. 

Using a tractor for fence removal can be a time-consuming task. The amount of time you need to spend depends on the type of fence you are removing. Some fence posts can be removed in less than an hour. Others can take as much as an hour. The time it takes depends on the type of fence you are tearing down and the amount of work required to get it out of the ground. If you are removing a wire fence, you can also use an automatic wire winder. This can save you a lot of time. 

When removing a barbed wire fence, you may need to wear protective clothing. This will help prevent your clothing from getting caught in the rotary cutter blades. In addition, you may want to roll up the old barbed wire. This is easier if you can roll it up tight. If you are not able to roll it up tight, you will end up with balls of barbed wire along the fence line. 

Some people also use Hi-lift jacks for their garden. If you have a Hi-lift jack, you can use it to remove fence posts. Having a Hi-lift jack can make the job easier, but many people use Hi-lift jacks for farming. There are a number of different Hi-lift jacks on the market. The ARB jack is more expensive, but is easier to use. A number of people also use a farmer’s jack, which is similar to a Hi-lift jack, but is easier to use. To use a farmer’s jack, you will need to drive the post near a concrete footing. You will then need to crank the jack to the point where it starts to pull the post out. 

Another tool you can use to remove fence posts is a root grapple. A root grapple is a tool that allows you to move a tree or post in the ground. To use a root grapple, you will need to position the grapple near the post and pull it down to the ground. You can also use a prybar to remove fence posts that are stuck in concrete.