Call Us Today! (406) 478-5125

How to Remove a Vinyl Fence Post?

Whether you are doing a fence repair or simply upgrading your home, you may need to know how to remove a vinyl fence post. Vinyl fences are affordable and durable, but they are not resistant to damage. As such, it is important to be careful when removing them. If you have sharp or pointed edges, you should wear protective eyewear and gloves. If you have children, you should also make sure that they are supervised when working with tools. 

(Looking for wood fencing company? Contact us today!)

To remove a vinyl fence post, you will first need to disassemble the fence. You can do this by using a hacksaw or a screwdriver. These tools will cut through the metal tabs that hold the rails in place. If the rails have a decorative opening, you can pry them open with a flat-head screwdriver or wire cutters. If you do not want to use these tools, you can sand them down by hand or with an electric sander. 

Once you have disassembled the rails, you can lift them and remove them from the posts. If the rails are secured by screws, they will need to be removed from both sides of the post. If they are secured by staples, you will need to remove these as well. 

Before you can replace your fence, you will need to remove the old posts and the concrete anchor that holds them in place. A good tool for removing old cemented fence posts is a fence post auger. This tool allows you to easily transport the tool anywhere. Its sturdiness and ease of operation make it a useful tool for weekend warriors. 

Once the posts have been lifted off, you will need to make a new hole for the fence. This should be at least six inches deeper than the fence post. If there are any cracks, you can fill them with a plastic filler. After the plastic has cured, you should clean the area with a damp cloth. If the plastic filler is not in good shape, you can remove it. If there is any excess, you can sand it down with fine-grit sandpaper. 

Before installing the new fence, it is a good idea to check that the post is straight. If it is not, you will have to adjust it before the concrete solidifies. If you are not comfortable doing this yourself, you can hire a junk removal service to do it for you. 

After removing the old fence, you will need to prepare the new one. You can buy a fence post mender or fence post inserts to reinforce the posts. This will keep them from breaking. 

If you are not confident in repairing your fence yourself, you can call a vinyl fence repair company. Depending on the fence’s construction, you will need to find a replacement piece. These jobs can be time-consuming, but they are relatively simple. Before starting, take a picture of the fence so you can identify the pieces that need to be replaced. The replacement part will also need to be aligned with the existing parts.