Call Us Today! (406) 478-5125

How to Remove Vinyl Fence Panels?

Taking down a vinyl fence can be an easy job if you have the right tools. If you have old and worn-out fences, you may have to do a little digging to remove them. You will need to wear leather gloves and eye protection. You will also want to schedule a junk removal service. 

(Searching in Google “wood fence companies near me“? Contact us today!)

Vinyl fences are made from PVC (polyvinyl chloride), a type of plastic. This material is much lighter than wood and is strong enough to withstand inclement weather. Nevertheless, it is susceptible to damage, especially if it is constantly exposed to the elements. If you notice that your fence is beginning to sag or has small cracks, you should consider removing it. This will save you from having to replace the entire fence. 

When removing a vinyl fence, you need to make sure that you are wearing safety gear. It is also important that you know how to use your tools. Before you begin, you should check to see if you have the right screwdriver. If you have one that is hex-head or Phillips-head, you should be able to use it. If not, you can get a screw extractor drill bit to help you remove corroded screws. 

The first step in removing a vinyl fence is to disassemble the top rails from the posts. You can use a pry bar to do this. You should not use a hammer or screwdriver because it can damage the fence’s metal. You can also use a drill to remove the tabs. You can dispose of the tabs in accordance with local municipal ordinances. 

After the top rails are removed, you can take down the bottom railing. You will need to remove the slats one by one. If you have interlocking panels, you will need to use a flat-head screwdriver to do this. If you have horizontal rails, you can remove them with a c-clamp. You can reinstall the rails using vise grips. 

Before you reinstall the rails, you will need to make sure that they are straight and properly aligned. If they are not, you will need to cut them shorter. If you do not have this option, you can use a hacksaw to cut them. You can also sand the surface to flush it with the rails. You can sand it with fine-grit sandpaper to remove any excess plastic filler. 

To clean the vinyl fence, you will need to soak it in water and wash it with a garden hose. You can also use a soft cloth to wipe away any stains. You can also use household bleach to remove any hard stains. You should use a non-abrasive scrubbing pad to avoid scratching the vinyl. 

If you have a vinyl fence that has horizontal rails, you will need to remove the screws that hold them in place. These screws can be difficult to remove. However, if you follow the steps below, you can easily remove them. You should also ensure that you are working from one end to the other.