How to Repair a Twisted Wrought Iron Fence?
Wrought iron fences are an attractive addition to any property, but they require regular maintenance to keep them looking their best. Some wrought iron fences can be damaged by corrosion, rust spots, breaks, or cracks. While most problems can be fixed by homeowners, more severe damage requires the expertise of a fencing professional.
(Looking for”metal yard fencing cost“? Contact us Today!)
Repairing a twisted wrought iron fence
If you have a twisted section of your fence, it’s important to get it repaired as soon as possible. This will prevent further damage to the fence.
First, inspect your fence to determine what needs to be done. Make sure the posts are level and free from any soil that could cause them to corrode or rot. If the post is set in concrete, you’ll need to lift it out and replace it with another one that’s straight and level.
Second, you’ll need to check the fence panels for loose or broken screws. Loose or broken screws can cause the panels to fall off. Remove the loose or broken screws and replace them with longer ones.
Third, check your fence for cracks or breaks in the rails and posts. These can be caused by moisture, exposure to the elements or a combination of both. Depending on the severity of the damage, you might need to repaint the fence or replace the posts and rails.
Fourth, check your fence for rusted sections that need to be restored. Rust is common on wrought iron fences, especially in damp or humid environments. If rust occurs, clean away any accumulated rust and paint the fence again to minimize its appearance.
Fifth, check your fence for bent or cracked pickets. Bent or cracked pickets can be repaired by straightening them with the right tools.
Sixth, inspect your gate and hinges for damages. A loose or damaged gate can be fixed by replacing hardware or tightening bolts. However, if the damage is more extensive, you may need to replace your gate altogether.
Seventh, inspect your fence for rust spots or chipping paint. Stainless steel and aluminum fences are less likely to develop rust spots, but some homeowners choose to touch up the paint on their wrought iron fences to reduce the appearance of rust.
Eighth, check for loose connections. It’s not uncommon for wrought iron fences and gates to become disconnected from each other or lose their connection to the bottom of the fence panels. If you notice that there are loose or missing connections, these can be easily fixed by reattaching them with wire.
ninth, fix a twisted fence piece or panel
If a decorative section of your fence has become separated from the rest of the metal, you can easily repair it by using an epoxy putty. This is a relatively simple DIY project and will save you money in the long run.
Unlike some types of wood, wrought iron fences are not easy to break or bend. This is because the metal is extremely malleable and bending it to the desired shape creates a highly ornamental look.