Call Us Today! (406) 478-5125

How to Seal Wood Fences?

You need to make sure your wood fence is protected from the weather. This means you need to know how to seal it. Sealing your fence will help keep it from rotting and warping. It will also add a protective coating that will protect it from UV rays, which can fade your wood over time. But you need to do it correctly. 

(Searching in Google “West Montana Fence Contractor“? Contact us today!)

First, you need to remove the old stain. If you have a fence that has been stained, you need to wait at least three weeks before you can seal it. If you have not stained your fence yet, you need to wait at least four weeks before you can apply a new coat. 

To clean your fence, you can use a pressure washer. However, be careful because it may cause damage to the wood. Instead, you can use a brush to scrub the wood, removing any dirt or debris. Then, you can hose down the fence with water. A broom can also be used to clean the rails. Once the fence is cleaned, it is ready for sealing. 

You need to be sure to follow the directions on the package to ensure that the wood fence is properly sealed. You should not use a fence sealer that is not approved by the manufacturer of the fence. Also, you should not paint your fence while the weather is wet. While the sealer is still wet, you should not let pets or children play on it. 

After you’ve applied your fence stain, you need to let it dry. Make sure that you do not apply it in full sun, but in areas that are sheltered from the sun. Allow it to dry completely before you apply the second coat. 

When applying the fence sealant, you should make sure that it is evenly distributed. Usually, it is best to do this in sections. However, you can also apply it with a spray nozzle. You can even use a container. Depending on the type of wood you have, you might need to do multiple coats. For example, cedar is porous, so you may need to use a pre-conditioner before you can apply a sealant. 

Wood fences need to be sealed periodically. They can last for up to 10 years, depending on how well they are taken care of. There are different types of fence sealers, so you need to choose one that will suit your needs. Semitransparent fence stains typically have a life span of two to five years. On the other hand, the more durable woods need to be sealed less often. 

You can choose to apply a sealer to your fence every two or three years. You can either seal it with an oil-based stain, or a water-based stain. Typically, you will need to wait at least three months before you can use a penetrating oil-based stain. Alternatively, you can apply a water-based sealer in a month. 

You can also apply a fence sealant after the wood has been exposed to rain or snow for several days. In this case, you will have to wait until the weather is warmer and the sun is less intense.