Call Us Today! (406) 478-5125

How to Stain a Cedar Fence?

Whether you’re adding a new cedar fence to your property or replacing an old one, it’s important to know how to stain a cedar fence. A stained cedar fence will protect the fence from the elements. However, you must take care of the fence before you can begin staining. You’ll need to clean and power wash the fence before staining. You’ll also need to use painter’s tape to protect the fence from stains. 

(Searching in Google “cedar fence pickets“? Contact us today!)

Depending on the type of stain you plan to use, you’ll need to apply it to the fence with a brush, roller, or sprayer. The type of stain you choose will depend on what kind of finish you’re looking for, as well as what kind of sealer you need. It’s a good idea to buy a quality brush and roller for the job. A wide brush helps to cover areas that are hard to reach with a roller. A paintbrush is best for oil-based stains. 

You’ll also need to remove any dirt or splinters before staining the fence. It’s important to do this, as it will make the stain adhere to the fence much better. You may also need to sand the fence to remove the rough edges. The final step is to apply a protective sealer. Depending on the type of stain you’re using, you may have to wait several days for the fence to dry. 

Before you begin staining your fence, it’s important to remove all traces of paint from the fence. You can do this with a pressure washer or paintbrush. If you decide to use a pressure washer, you’ll want to use a low-pressure setting. This will ensure that the wood is completely dry before applying the stain. 

Staining a cedar fence is easy to do, and can be a great way to protect your fence from the elements. However, the process will take time and patience. You’ll need to follow the directions on the stain’s label to ensure that you’re using a safe product. Also, keep in mind that you may need to apply more coats of stain, depending on how thick the coat is. 

Apply the stain in two or three-foot sections. Start at the bottom and move up to the top of the fence. You’ll also want to apply the stain in two or three-foot sections if you’re using a roller. If you’re using a sprayer, you’ll need to stand back at least ten inches from the fence. Use slow, even strokes, and make sure to overlap the sprays. You’ll also want to stir the stain regularly when you apply it. 

Once you’ve applied the stain, you can apply a protective sealer. Depending upon the stain you use, you may want to wait 24 to 48 hours before applying another coat. This will depend on the weather and the humidity of the area. 

When applying a stain to a cedar fence, you should be sure that you have the right tools for the job. A sprayer is recommended, but a brush and roller are also great tools.