What Can I Do With a Concrete Fence Post After Removal?
There are a few things you can do with a concrete fence post after it has been removed. These include backfilling the hole and repairing or replacing the post. However, if you are not familiar with concrete fence posts, it is important to have the right knowledge before attempting this project.
(Looking for wood and wrought iron fence services? Contact us today!)
Backfill a concrete fence post after removal
Backfilling a concrete fence post after removal involves excavating the hole around the post. The hole should be just large enough to accommodate the fence post and allow for a little settling. If the post is a large one, you may have to brace the top rail to ensure that it remains vertical.
The first step is to measure the new post. Ideally, it should match the original post’s diameter and length. However, it is important to keep in mind that lumber doesn’t always have the same nominal sizing. A new post might need to be shortened slightly to fit in the hole.
When backfilling a concrete fence post, you’ll want to choose a material that is suitable for its purpose. Sand or gravel are two common materials that work well for this purpose, but they’re not as durable as cement. Crushed rock or gravel are also an option, but they’re not as solid as cement.
Repair a concrete fence post
Repair a concrete fence post after removal requires some skill. First, it is important to make sure the new post matches the old one. Not all lumber is the same size. While nominal sizing is typically nine-1/2 inches, actual lumber can be smaller or larger. The new post also needs to match the diameter of the hole in the old post. If it doesn’t, you may need to make slight modifications.
In addition, the damaged section of the post should be inspected. If it is leaning, it is most likely due to rot in the base. If it is, it should be replaced. In the meantime, remove the soil around the damaged portion and push the post into a proper position. In some cases, the fence post might shift out of alignment with other posts, in which case you should replace it.
Replace a concrete fence post
Replacing a concrete fence post can be a time-consuming task. There are several different methods to replace a fence post. Leaving the concrete footing can save you both time and money. Moreover, it saves you from pouring new concrete, which can take a lot of time if you need to replace several posts.
First, you need to dig a hole that is equal to the size of the existing post. However, you should make sure that you do not dig around the post. Do not go around the post because that will require more digging. Secondly, do not make the hole larger than the post, as this will increase the amount of work.
When replacing a concrete fence post, you should take care to make sure that the new post matches the old one. Before you do this, you need to break down the old post’s concrete footing. If this is not possible, you may need to cut it shorter.
